 |
FLO Headworks: |
|
|
|
| ||||||||||||||||||||||||||||||||||||||||||||||||||||
| The Shovelhead came along just as
the dark days of AMF ownership were beginning. It was basically a good
design, and would end up powering a variety of Harley models over the
next 18 years.
But build quality was not always what it should have been. And there were built-in weaknesses that need to be corrected if you're going to enjoy riding your Shovel to the max. For starters, you should consider our No Lead Conversion service to save your valves from today's lower-octane, lead-free gas. Our replacement valve springs will reduce friction; Dual Plugging will eliminate detonation you may not even be aware of; our Hydraulic Lifter kit will improve volumetric efficiency; and our Super Port Flow process will increase power. |
 |
| Shovelheads are prone to exhaust
leaks. The pipes don't want to stay on the heads. Threads strip and
helicoils don't last. Our 3-Bolt Exhaust Flange kits provides a
permanent solution to this problem.
The Shovel's oiling system isn't exactly the most efficient, especially in the top end. Our Top End Oiler kit will double the life of your rockers, valves, and guides. |
|
| SCROLL DOWN FOR DETAILED PRICE LIST | |
|
|
|
| Click any item for a detailed description. Scroll down for prices. | |
| PARTS | SERVICES |
| Cylinder Heads | No Lead Conversion |
| Power Arc Ignition Kit | Super Port Flow |
| Dual Plug Ignition Kit | Dual Plugging |
| Dual Plug Wire Kit | General Port Work |
| 3 Bolt Exhaust Flange Kit | 3 Bolt Exhaust Flange Install |
| Top End Oiler Kit | Flow Testing |
| Top End Return Kit | Machinc for Oil Return Kit |
| FlowMaster Cams (Indexable) | Cylinder Head Machining |
| FLO Valve Spring Kit | Repair Work / Welding |
| FLO High Flow Valves | Cylinder Head Painting |
| FLO Pushrods | Cylinder Head Resurfacing |
| FlowMaster Cam Kit | Dynamometer Test & Tune |
| Hydraulic Lifter Kit w/Pushrods | Kehien Carb Blueprinting |
| High Flow Valves | Lower End Rebuild |
| Kehien
CV Carburetor 40mm (like new) |
Lower End Machining |
| Kehein Intake Manifold | Transmission Overhaul |
| 700 CFM Air Filter Kit | |
| Thunderjet
Kit Installed (racing only) |
|
| For credit card orders, add a 5% handling charge. | |
|
© 2000-2014, FLO
Headworks. Contact Perry Kime at 805-481-6300 or via
e-mail. |
